38
•
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
•
Do not wear any conductive objects, such as jewelry or watches.
Before installing, make sure that you back up the data, stop all services, and power off the server.
For more information, see "
Remove the blade server. For more information, see "
You might also remove other components. For the removed components to be reinstalled correctly,
record their positions and connections before removal, for example, taking pictures of cable
connection and drive installation positions, or labeling cables.
Removing the system battery
1.
Remove the access panel. Press the unlock button on the access panel, slide the panel to the
server rear, and lift the access panel.
2.
Remove the system battery. Pinch the system battery by its top edge and the battery will
disengage from the battery holder.
NOTE:
For environment protection purposes, dispose of the used-up system battery at a designated
site.
Installing the system battery
1.
Install the system battery.
a.
Insert the system battery with the plus sign "+" facing up into the system battery holder.
b.
Press down the battery to secure it into place.
2.
Install the access panel. Align the standouts on the access panel with the notches in the chassis
side panels, place the panel onto the chassis, and slide the access panel to the server front.
3.
Install the blade server. For more information, see "
4.
Power on the blade server. For more information, see "
5.
Access the BIOS to reconfigure the system date and time. For more information, see the BIOS
user guide for the server.
