H3C UniServer B5800 G3, Руководство пользователя

Страница: 31 / 78

23
Installing a SATA M.2 SSD adapter
1. Take the SATA M.2 SSD adapter out of the antistatic bag, and insert the SATA M.2 SSDs into
the adapter.
2. Remove the adapter blank, if any. Pressing the button on the blank to the right, pull the blank
out of the chassis.
3. Insert the adapter into the slot on the server.
4. (Optional.) Power on the blade server. For more information, see " Powering on the blade
server ."
Replacing a Micro SD card
Prerequisites
Take the following ESD prevention measures:
•
Wear antistatic clothing.
•
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
•
Do not wear any conductive objects, such as jewelry or watches.
Identify the position of Micro SD cards to be replaced.
Before replacing, make sure that you back up the data, stop all services, and power off the blade
server. For more information, see "
Powering off the blade server ."
Remove the blade server. For more information, see " Removing the blade server ."
When you replace a component, examine the slot and connector for damages. Make sure the pins
are not damaged (bent for example) and do not contain any foreign objects.
You might also remove other components. For the removed components to be reinstalled correctly,
record their positions and connections before removal, for example, taking pictures of cable
connection and drive installation positions, or labeling cables.
Removing a Micro SD card
1. Open the retaining latch of the Micro SD card. Slide the retaining latch to the server front and
open the retaining latch.
2. Remove the Micro SD card from the slot.
3. Close and lock the retaining latch.
Installing a Micro SD card
1. Install a Micro SD card.
a. Take the Micro SD card out of the antistatic bag.
b. (Optional.) Open the retaining latch of the Micro SD card. Slide the retaining latch to the
server front, and open the retaining latch.
c. Install a Micro SD card. Insert the SD card into the slot with the gold fingers facing down.
Close the retaining latch and slide the retaining latch to the server rear to lock it.
2. Install the access panel. Align the standouts on the access panel with the notches in the chassis
side panels, place the panel onto the chassis, and slide the panel to the server front until it is
secured into place.
3. Install the blade server. For more information, see " Installing the blade server ."