9
Table 2 Default OM login parameters
Item
Default value
Username
admin
Password
Password@_
IP address of the management
interface (fixed)
192.168.100.100/24
Table 3 Default HDM login parameters
Item
Default value
Username
admin
Password
Password@_
IP address of the management
interface
Obtained from the DHCP server
Connecting the blade server to a network
Connecting through the management module
Use either of the following methods to connect the blade server to the network through the
management module:
•
Connect the network cable to one of the four service ports on the management module.
Figure 2 Service ports on the management module
•
Connect the network cable to the
MGMT
management port.
Connecting through ICMs
The mezzanine network adapter on each blade server has a corresponding ICM. To connect a blade
server to the network through an ICM, make sure the corresponding ICM are present. For more
information about mezzanine network adapter and ICM mapping relations, see "Appendix A Server
specifications."
Verifying the blade server status
After powering on the server, perform the following tasks to make sure that the server is working
correctly:
