H3C UniServer B5800 G3, Руководство пользователя

Страница: 30 / 78

22
Removing a SATA M.2 SSD module
Hold a SATA M.2 SSD module by its handle, and pull the module out from the slot.
Installing a SATA M.2 SSD module
1. Insert the SATA M.2 SSD module into the adapter module.
2. (Optional.) Power on the blade server. For more information, see " Powering on the blade
server ."
Replacing a SATA M.2 SSD adapter
To configure RAID settings after the SSD module is replaced, see the storage controller user guide
for the server.
Guidelines
WARNING!
To avoid bodily injury from hot surfaces, allow the server and its internal modules to cool before
touching them.
SATA M.2 SSD adapters are hot swappable.
Prerequisites
Take the following ESD prevention measures:
•
Wear antistatic clothing.
•
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
•
Do not wear any conductive objects, such as jewelry or watches.
Identify the position of the SATA M.2 SSD adapter module to be replaced.
The SATA M.2 SSD adapter module is installed with an operating system. Make sure that you back
up service data and stop all services before replacing.
When you replace a component, examine the slot and connector for damages. Make sure the pins
are not damaged (bent for example) and do not contain any foreign objects.
You might also remove other components. For the removed components to be reinstalled correctly,
record their positions and connections before removal, for example, taking pictures of cable
connection and drive installation positions, or labeling cables.
Removing a SATA M.2 SSD adapter
1. Remove a SATA M.2 SSD adapter. Press to release the handle on the adapter, and hold the
handle to pull the adapter out of the slot.
2. Remove the SATA M.2 SSDs from the adapter. Hold a SATA M.2 SSD by its handle, and pull
the SATA M.2 SSD out of the slot. Put the adapter into an antistatic bag.