H3C S5120-SI Series, Руководство по эксплуатации

Страница: 79 / 697

1-1
1
Link Aggregation Configuration
When configuring link aggregation, go to these sections for information you are interested in:
z
Overview
z
Link Aggregation Configuration Task List
z
Configuring an Aggregation Group
z
Configuring an Aggregation Group
z
Displaying and Maintaining Link Aggregation
z
Link Aggregation Configuration Examples
Overview
Link aggregation aggregates multiple physical Ethernet ports into one logical link, also called an
aggregation group.
It allows you to increase bandwidth by distributing traffic across the member ports in the aggregation
group. In addition, it provides reliable connectivity because these member ports can dynamically back
up each other.
Basic Concepts of Link Aggregation
Aggregate interface
An aggregate interface is a logical Layer 2 or Layer 3 aggregate interface.
The current device only supports Layer 2 aggregate interface.
Aggregation group
An aggregation group is a collection of Ethernet interfaces. When you create an aggregate interface, an
aggregation group numbered the same is created automatically depending on the type of the aggregate
interface:
z
If the aggregate interface is a Layer 2 interface, a Layer 2 aggregation group is created. You can
assign only Layer 2 Ethernet interfaces to the group.
z
If the aggregate interface is a Layer 3 interface, a Layer 3 aggregation group is created. You can
assign only Layer 3 Ethernet interfaces to the group.