H3C S5120-SI Series, Руководство по эксплуатации

Страница: 124 / 697

1-7
To do… Use the command… Remarks
Enter Ethernet
interface view
interface interface-type
interface-number
Enter Layer-2
aggregate
interface view
interface bridge-aggregation
interface-number
Enter
interface
view or port
group view
Enter port
group view port-group manual
port-group-name
Required
Use either command.
z
In Ethernet interface view,
the subsequent
configurations apply to the
current port.
z
In port group view, the
subsequent configurations
apply to all ports in the port
group.
z
In Layer-2 aggregate
interface view, the
subsequent configurations
apply to the Layer-2
aggregate interface and all
its member ports.
Configure the link type of the
port or ports as access
port link-type access
Optional
The link type of a port is access
by default.
Assign the current access
port(s) to a VLAN
port access vlan vlan-id
Optional
By default, all access ports
belong to VLAN 1.
Before assigning an access port to a VLAN, create the VLAN first.
Assigning a Trunk Port to a VLAN
A trunk port can carry multiple VLANs. You can assign it to a VLAN in interface view or port group view.
Follow these steps to assign a trunk port to one or multiple VLANs:
To do… Use the command… Remarks
Enter system view system-view —
Enter
Ethernet
interface view
interface interface-type
interface-number
Enter Layer-2
aggregate
interface view
interface bridge-aggregation
interface-number
Enter
interface view
or port group
view
Enter port
group view port-group manual
port-group-name
Required
Use either command.
z
In Ethernet interface view, the
subsequent configurations
apply to the current port.
z
In port group view, the
subsequent configurations
apply to all ports in the port
group.
z
In Layer-2 aggregate
interface view, the
subsequent configurations
apply to the Layer-2
aggregate interface and all its
member ports.