![H3C S5120-SI Series Скачать руководство пользователя страница 529](http://html2.mh-extra.com/html/h3c/s5120-si-series/s5120-si-series_operation-manual_3711174529.webp)
1-11
To do…
Use the command…
Remarks
Specify the source interface for
NTP messages
ntp-service source-interface
interface-type interface-number
Required
By default, no source interface
is specified for NTP messages,
and the system uses the IP
address of the interface
determined by the matching
route as the source IP address
of NTP messages.
z
If you have specified the source interface for NTP messages in the
ntp-service unicast-server
or
ntp-service unicast-peer
command, the interface specified in the
ntp-service unicast-server
or
ntp-service unicast-peer
command serves as the source interface of NTP messages.
z
If you have configured the
ntp-service
broadcast-server
or
ntp-service
multicast-server
command, the source interface of the broadcast or multicast NTP messages is the interface
configured with the respective command.
Disabling an Interface from Receiving NTP Messages
When NTP is enabled, NTP messages can be received from all the interfaces by default, and you can
disable an interface from receiving NTP messages through the following configuration.
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter interface view
interface
interface-type
interface-number
—
Disable the interface from
receiving NTP messages
ntp-service in-interface
disable
Required
An interface is enabled to
receive NTP messages by
default.
Configuring the Maximum Number of Dynamic Sessions Allowed
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure the maximum
number of dynamic sessions
allowed to be established
locally
ntp-service
max-dynamic-sessions
number
Required
100 by default
Содержание S5120-SI Series
