H3C S5120-SI Series, Руководство по эксплуатации

Страница: 411 / 697

1-30
This example assumes that the RADIUS server runs iMC PLAT 3.20-R2602 or iMC UAM 3.60-E6102.
# Add an access device.
Log into the iMC management platform, select the Service tab, and select Access Service > Service
Configuration from the navigation tree to enter the Service Configuration page. Then, click Add to
enter the Add Access Device window and perform the following configurations:
z
Set both the shared keys for authentication and accounting packets to expert
z
Specify the ports for authentication and accounting as 1812 and 1813 respectively
z
Select Device Management Service as the service type
z
Select H3C as the access device type
z
Select the access device from the device list or manually add the device with the IP address of
10.1.1.2
z
Click OK to finish the operation
Figure 1-8 Add an access device
# Add a user for device management
Log into the iMC management platform, select the User tab, and select Access User View > All
Access Users from the navigation tree to enter the All Access Users page. Then, click Add to enter
the Add Device Management User window and perform the following configurations:
z
Add a user named hello@bbb and specify the password
z
Select SSH as the service type
z
Specify the IP address range of the hosts to be managed as 192.168.1.0 to 192.168.1.255, and
click Add to finish the operation