H3C S3610-28F Скачать руководство пользователя страница 980

Страница: 980 / 1547

Operation Manual – DHCP
H3C S3610&S5510 Series Ethernet Switches

Chapter 1 DHCP Overview

1-3

3) If several DHCP servers send offers to the client, the client accepts the first

received offer, and broadcasts it in a DHCP-REQUEST message to formally

request the IP address.

4) All DHCP servers receive the DHCP-REQUEST message, but only the server to

which the client sent a formal request for the offered IP address returns a

DHCP-ACK message to the client, confirming that the IP address has been

allocated to the client, or returns a DHCP-NAK unicast message, denying the IP

address allocation.

Note:

After the client receives the DHCP-ACK message, it will probe whether the IP

address assigned by the server is in use by broadcasting a gratuitous ARP packet. If

the client receives no response within specified time, the client can use this IP

address. Otherwise, the client sends a DHCP-DECLINE message to the server to

request an IP address again.

If there are multiple DHCP servers, IP addresses offered by other DHCP servers are

assignable to other clients.

1.2.3 IP Address Lease Extension

The IP address dynamically allocated by a DHCP server to a client has a lease. After

the lease duration elapses, the IP address will be reclaimed by the DHCP server. If the

client wants to use the IP address again, it has to extend the lease duration.

After the half lease duration elapses, the DHCP client will send the DHCP server a

DHCP-REQUEST unicast message to extend the lease duration. Upon availability of

the IP address, the DHCP server returns a DHCP-ACK unicast confirming that the

client’s lease duration has been extended, or a DHCP-NAK unicast denying the

request.

If the client receives the DHCP-NAK message, it will broadcast another

DHCP-REQUEST message for lease extension after 7/8 lease duration elapses. The

DHCP server will handle the request as above mentioned.

1.3 DHCP Message Format

Figure 1-3

gives the DHCP message format, which is based on the BOOTP message

format and involves eight types. These types of messages have the same format

except that some fields have different values. The numbers in parentheses indicate the

size of each field in bytes.

Содержание S3610-28F












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S3610-28F

Отзывы:

Похожие инструкции для S3610-28F

Бренды по названию

Популярные бренды

H3C S3610-28F, Руководство по эксплуатации

Результаты поиска

Содержание S3610-28F

Отзывы:

Похожие инструкции для S3610-28F

Бренды по названию

Популярные бренды