Operation Manual – Port Correlation Configuration
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 Port Isolation Configuration
2-2
Isolated
Ports outside the isolation
group
Uplink ports in the same
isolation group
Ordinary ports in the same
isolation group
Ports outside the isolation
group
Ordinary ports in an
isolation group
Uplink ports in an isolation
group
Uplink ports in other
isolation groups
Uplink ports in an isolation
group
Ordinary ports in other
isolation groups
Ordinary ports in an
isolation group
Ordinary ports in other
isolation groups
Uplink ports in an isolation
group
Figure 2-1
Connectivity of layer 2 data between ports inside and outside an isolation
group on a device supporting uplink port
Note:
The arrows in the above figure indicate the transmission direction of Layer 2 data.
2.2 Configuring an Isolation Group
2.2.1 Adding a Port to an Isolation Group
Follow these steps to add a port to an isolation group:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter
Ethernet
port view
interface
interface-type
interface-number
Enter
Ethernet
port view
or port
group
view
Enter
port
group
view
port-group
{
manual
port-group-name
|
aggregation agg-id
}
Either of the two is required.
Configured in Ethernet port view,
the setting is effective on the
current port only; configured in
port group view, the setting is
effective on all ports in the port
group.
