Operation Manual – VLAN
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 VLAN Configuration
1-10
Note:
z
To convert a Trunk port into a Hybrid port (or vice versa), you need to use the
Access port as a medium. For example, the Trunk port has to be configured as an
Access port first and then a Hybrid port.
z
The default VLAN IDs of the Trunk ports on the local and peer devices must be the
same. Otherwise, packets cannot be transmitted properly.
1.4.4 Configuring a Hybrid-Port-Based VLAN
A Hybrid port may belong to multiple VLANs, and this configuration can only be
performed in Ethernet port view or port group view.
Follow these steps to configure the Hybrid-port-based VLAN:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter
Ethernet
port view
interface interface-type
interface-number
Enter
Ethernet
port view
or port
group
view
Enter port
group view
port-group
{
manual
port-group-name
|
aggregation agg-id
}
Use either command;
In Ethernet port view, the
subsequent
configurations only apply
to the current port; in port
group view, the
subsequent
configurations apply to all
ports in the port group
Configure the port link
type as Hybrid
port link-type
hybrid
Required
Allow the specified
VLANs to pass through
the current Hybrid port
port hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
Required
By default, all Hybrid
ports only allow packets
of VLAN 1 to pass.
Configure the default
VLAN of the Hybrid port
port hybrid pvid vlan
vlan-id
Optional
VLAN 1 is the default by
default
