Installation Manual
H3C SecPath F1000-S Firewall
Chapter 1 Product Overview
1-5
III. Gigabit Ethernet (GE) Interface
The H3C SecPath F1000-S firewall provides four fixed 10/100/1000 Mbps
auto-sensing interfaces (with two electrical interfaces and two applicable to both optical
and electrical modes). The electrical interface uses the RJ-45 connector and the optical
interface uses the small form-factor pluggable (SFP) connector.
Five 1000Base-FX SFP optical transceiver options are available for the H3C SecPath
F1000-S firewall:
z
Multimode short-haul (850 nm)
z
Single mode medium-haul (1310 nm)
z
Single mode long-haul (1310 nm)
z
Single mode long-haul (1550 nm)
z
Single mode ultra-long haul (1550 nm)
They all provide LC interfaces and are hot swappable.
Table 1-5 shows the Ethernet interface attributes of the H3C SecPath F1000-S firewall.
Table 1-5
Attributes of the GE electrical interfaces
Attribute
Description
Connector RJ-45
Interface type
auto-MDI/MDIX
Frame format
Ethernet_II
Ethernet_SNAP
Operating mode
10/100/1000 Mbps auto-sensing
Full/half duplex
(1000 Mbps and half duplex cannot be used at the same time)
Table 1-6
Attributes of the GE optical interfaces
Description
Attribute
Multimo
de
short-ha
ul (850
nm)
Single
mode
medium-ha
ul (1310
nm)
Long-haul
(1310 nm)
Long-haul
(1550 nm)
Ultra-long
haul (1550
nm)
Connector SFP/LC
Optical fiber
62.5/125
μ
m
multimod
e fiber
9/125
μ
m
single mode
fiber
9/125
μ
m
single
mode fiber
9/125
μ
m
single
mode fiber
9/125
μ
m
single
mode fiber
