Installation Manual
H3C SecPath F1000-S Firewall
Chapter 1 Product Overview
1-2
It supports active/standby switchover to protect current services against interruption,
eliminating the defects of traditional networking solution, for example, VRRP
networking solution.
You can upgrade the application and Boot ROM programs on line to add features and
extend functions.
It supports the branch intelligent management system (BIMS) feature to automatically
upgrade the configuration file and application programs, and the VPN manager
function to configure and deploy VPNs.
It supports the SNMP v3 protocol to offer powerful device management functions. With
the national and international standards dominant in China, North America, Europe,
Australia and Japan taken into consideration in its design, the firewall complies with the
requirements of these countries and regions in electromagnetic compatibility (EMC),
safety, and network access.
1.2 Hardware Features
1.2.1 Appearance
Figure 1-1
Front panel of the H3C SecPath F1000-S firewall
Figure 1-2
Rear panel of the H3C SecPath F1000-S firewall
1.2.2 System Description
Table 1-1
Technical specifications of the H3C SecPath F1000-S firewall
Item
Description
MIM slot
Two
Fixed interface
Two 10/100/1000 Mbps Ethernet interfaces (applicable to
both optical and electrical modes)
Two 10/100/1000 Mbps Ethernet electrical interfaces
One auxiliary port (AUX)
One console port (CON)
Boot ROM
512 KB
