Installation Manual
H3C SecPath F1000-S Firewall
Chapter 8 Multifunctional Interface Modules
8-1
Chapter 8 Multifunctional Interface Modules
8.1 MIM Options
Following are the MIMs available for the H3C SecPath F1000-S firewall:
z
1-port 10Base-T/100Base-TX Fast Ethernet interface module (1FE)
z
2-port 10Base-T/100Base-TX Fast Ethernet interface module (2FE)
z
4-port 10Base-T/100Base-TX Fast Ethernet interface module (4FE)
z
1-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (1GBE)
z
2-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (2GBE)
z
1-port 1000Base-LX/1000Base-SX optical interface module (1GEF)
z
2-port 1000Base-LX/1000Base-SX optical interface module (2GEF)
z
Security socket layer encryption module (SSL)
8.2 Installing and Removing an MIM
Caution:
There is a shield finger on the front panel of the MIM module, which provides
electromagnetic shielding for the firewall. You must keep the shield finger intact when
replacing the module. Do not remove the shield finger.
Before installing MIMs, read Chapter 2 “Preparation for Installation” carefully.
I. Tools
ESD-preventive wrist strap
II. Installing an MIM
Caution:
Before performing any of the following operations, make sure you have completely
powered down the firewall to avoid getting electric shocks.
Step 1: Place the firewall with its front panel facing you.
