Installation Manual
H3C SecPath F1000-S Firewall
Chapter 1 Product Overview
1-6
Description
Attribute
Multimo
de
short-ha
ul (850
nm)
Single
mode
medium-ha
ul (1310
nm)
Long-haul
(1310 nm)
Long-haul
(1550 nm)
Ultra-long
haul (1550
nm)
Max
transmission
distance
0.55 km
(0.34 mi)
10 km (6.21
mi)
40 km
(24.86 mi)
40 km
(24.86 mi)
70 km
(43.5 mi)
Central
wavelength
850 nm
1310 nm
1310 nm
1550 nm
1550 nm
Min –9.5 dBm
–9 dBm
–2 dBm
–4 dBm
–4 dBm
Transmi
tter
optical
power
Max 0 dBm
–3 dBm
5 dBm
1 dBm
2 dBm
Receiver
sensitivity
–17 dBm
–20 dBm
–23 dBm
–21 dBm
–22 dBm
Operating
mode
1000 Mbps
Full duplex
Frame format
Ethernet_II
Ethernet_SNAP
Note:
z
When using optical transceivers, select those that have been approved by our
company.
z
Before performing switchover between electrical/optical interfaces, you need to first
disable the rate and duplex mode configurations in the current mode (electrical or
optical), and then configure the interface after the switchover.
1.2.5 MIMs
The H3C SecPath F1000-S firewall provides two MIM (multifunctional interface module)
expansion slots, which can hold these types of MIMs:
z
1-port 10Base-T/100Base-TX fast Ethernet interface module (1FE)
z
2-port 10Base-T/100Base-TX fast Ethernet interface module (2FE)
z
4-port 10Base-T/100Base-TX fast Ethernet interface module (4FE)
z
1-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (1GBE)
z
2-port 10Base-T/100Base-TX/1000Base-T Ethernet interface module (2GBE)
z
1-port 1000Base-LX/1000Base-SX optical interface module (1GEF)
z
2-port 1000Base-LX/1000Base-SX optical interface module (2GEF)
