ELECTRO FREEZE Shake Model CS600
184596
26
PROBLEM
PROBABLE CAUSE
REMEDY
13 Troubleshooting Charts
— continued
1.
Improperly wired.
1.
Contact your Electro Freeze Distributor
for service.
2.
Low line voltage.
2.
Ask power company to increase voltage
to not less than 10% below dataplate
rating or have transformer installed. Have
wire checked for inadequate wire size.
3.
Open start capacitor. (Single phase only) 3.
Contact your Electro Freeze Distributor
for service.
Compressor
will not start –
hums
intermittently
(cycling on
overload)
4.
Defective compressor
4.
Contact your Electro Freeze Distributor
for service.
Keep your freezer in excellent condition. Always contact your
Electro Freeze distributor for replacement parts and
maintenance scheduling.
NOTE: Contact your authorized Electro Freeze distributor for
instructions prior to warranty compressor replacement.
QUALITY PARTS
PROTECT
Y O U R
EQUIPMENT
