![background image](http://html1.mh-extra.com/html/marquis/3000-sm/3000-sm_owners-manual_1730452001.webp)
OWNERS’ MANUAL
3000 SM
4000 SM
4500 SM
5500 SM
6500 SM
CIRCLE THE MODEL OF YOUR
COOLER AND RECORD THE SERIAL
NUMBER BELOW.
READ CAREFULLY ALL OF THIS
MANUAL BEFORE INSTALLING THE
UNIT
ENCIERRE CON UN CIRCULO EL
MODELO DE SU ENFRIADOR Y ESCRIBE
EL NUMERO DE SERIE ABAJO.
LEA CON CUIDADO TODO ESTE MANUAL
ANTES DE INSTALAR LA UNIDAD
SERIAL #
NUMERO DE SERIE
SAFETY RULES
1. Read instructions carefully.
2. Electrical hook up should be done by a qualified electrician,
so that all electrical wiring will conform to your local
standards.
3. Always turn
OFF POWER
and
UNPLUG
motor and pump
inside the cooler before installing or performing any
maintenance.
4. Your cooler will run on 120 volt A.C., 60 Hz (cycle) current
only.
5. Motor and pump have a grounded, molded plug and an
automatic thermal overload switch which will shut motor off
when it overheats. The motor will restart automatically when
it cools down.
WARNING
:
To reduce the risk of fire or electric shock,
do not use this fan with any “solid-state fan speed control
device.”
READ AND SAVE THESE INTRUCTIONS
EVAPORATIVE COOLING
With this unit being a fresh air system, you are not trapped
with recirculating air that can become stale, laden with smoke
and odors, as happens with refrigerated air conditioning
systems. Instead, you are completely replacing the air every
2 to 4 minutes by either opening doors or windows or a
combination of both to exhaust the air continually.
VEA EL ESPAÑOL EN EL INTERIOR.
110520
4-01
OPERATION
To eliminate delivery of hot air when starting cooler, turn on
pump only for the first few minutes, then turn on the blower
motor.
These coolers may be used without water for ventilation
purposes. When outside air is cool (for example, at night) or
when humidity is high the water pump can be turned off.
A cooler can also be installed with a thermostat and attic
exhaust dampers to provide completely automatic operation.
www.championcooler.com