ELECTRO FREEZE Model CS600
184596
9
7
Disassembly and Cleaning
7.1 Cleaning Accessories
The following are accessories necessary for cleaning, sanitizing and disassembly/
assembly.
1. BRUSH -
.
4-inch diam-
eter used to clean the cylinder.
2. HANDLE -
36-inch
handle used with brush p/n HC15010.
3. BRUSH -
9/16-inch in
diameter with 36-inch handle used to clean
drain tube.
4. BRUSH - DOUBLE END -
.
1-1/8-inch diameter and 7/16-
inch diameter used for cleaning mix feed
tube and general cleaning.
5. TOOL - O-RING REMOVAL.
.
Aids in removing O-rings from
plunger, head, air relief plug, and spindle.
6. LUBRICANT - LUBRI-FILM PLUS
.
Approved lubricant for moving
parts and O-rings.
7. BRUSH -
.
1-inch in
diameter 12 inches long used to clean the
hopper walls.
.
used
to flush the plunger and hopper walls.
Figure 7-1 Accessories
BRUSH-4” DIA
BRUSH-9/16” DIA X 36” HANDLE
HANDLE-BRUSH 36” FIBERGLASS
TOOL-O RING REMOVAL
BRUSH-7/16” DIA & 1-1/8” DIA DOUBLE END
BRUSH-1” DIA X 12” LONG
LUBRICANT-LUBRI-FILM PLUS
BOTTLE WASH
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are
in the “OFF” position and
that the main power supply
is disconnected.
It is important that the freezer be disas-
sembled, washed, lubricated and sanitized
before operation.
The cleaning and sanitizing instructions
explained in this manual are required to
maintain a clean, sanitary freezer. The
freezer should be disassembled, cleaned,
reassembled, lubricated and sanitized to
ensure the best possible product quality
and freezer operation.
Persons assembling, cleaning, or sanitizing
the freezer must wash and sanitize hands
and forearms with an approved sanitizer.
