Configuration
16
· G&D FIBREVision
Changing the configuration
The configuration can either be changed in the setup mode or in the setup menu.
The descriptions of the configurable functions on the following pages include
instructions on how to configure both the setup mode and the setup menu.
Operating the setup mode
The setup mode can be enabled using the console keyboard. After enabling, the con-
figuration of the
FIBREVision
system can be changed by using various step keys.
How to enable the setup mode:
Press the
Backspace
(default:
Ctrl+Backspace
) key combination to enable
the setup mode.
The successful activation of the setup mode is displayed by the blinking
NUM
,
and
Scroll
control LEDs on the keyboard. Additionally, the yellow
User
LED will blink at
both the computer module and the user module.
Now you can perform a setup function.
How to perform a setup function:
After enabling the setup mode, press one of the setup keys described on the fol-
lowing pages.
How to end the setup mode without performing a function:
Press
ESC
to end the setup mode.
NOTE:
Only one setup function can be performed after the calling of the setup mode.
If you want to perform more functions, please restart the setup mode.
NOTE:
The key combination for enabling the setup mode needs to be pressed for
seven seconds
.
After the first call of the setup mode, the hotkey delay can be disabled by pressing
the setup key
8
(see page 19).