Monitoring
44
· G&D FIBREVision
The following table lists the different fields as well as the possible states:
Querying the diagnosis functions (GETDIAG)
The
GETDIAG
command can be used to query different diagnosis information of the
KVM extender.
The following table lists the different fields as well as the possible states:
Field
Description
Status
FreezingActive
active Freeze function
YES, NO
LocalVideoInput
valid video signal at computer module
(CPU)
OK, FAIL
StatusLocal
status of computer module (CPU)
OK, FAIL
StatusRemote
status of user module (CON)
OK, FAIL
USBStatus Mode=“TRANS”
status of transparent USB bus
OK, FAIL
NOTE:
Only KVM extenders with USB 1.1 support monitor the status of the trans-
parent USB bus.
For devices with USB 2.0 support the line
USBStatus Mode="Trans"
always displays
FAIL
.
Command:
<GETDIAG ReqID=”123”/>
Exemplary answer of the KVM extender:
<DIAG Ver="1" ReqID="123">
<Resolution>1600x1200</Resolution>
<TemperatureLocal>35</TemperatureLocal>
<TemperatureRemote>37</TemperatureRemote>
</STATUS>
Field
Description
Value
Resolution
resolution of the incoming video signal in pix-
els
width × height
TemperatureLocal
temperature of computer module
(CPU) in °C
rounded number
TemperatureRemote
temperature of user module (CON)
in °C
rounded number
