Safety instructions
2
· G&D FIBREVision
Special instructions for dealing with laser technology
The devices of the
FIBREVision
series use components with laser technology, which
comply with laser class 1.
They meet the requirements according to DIN EN 60825-1:2001-11, IEC 60825-1 as
well as U.S. CFR 1040.10 and 1040.11.
Mind the following advices when dealing with laser beams:
!
Avoid eye contact with laser beam
Although class 1 laser are considered as being nonhazardous, direct eye contact
should be avoided. Do
not
stare into the beam or view directly with optical
instruments.
!
Always connect optical connections or cover them with protection caps
Always cover the optical connections of the
Transmission
socket and the cable
plugs with a connector or a protection cap.
!
Only use G&D certified transmission modules
It is not allowed to use transmission modules that do not comply with laser
class 1 according to DIN EN 60825-1:2001-11. By applying such modules, the
compliance of the given instructions and recommendations for laser safety can-
not be guaranteed.
The guarantee of complying with all relevant instructions can only be given by
applying original components. Therefore, the devices have to be operated with
G&D certified transmission modules only.
LASER CLASS 1
DIN EN 60825-1:2001-11
Complies with 21 CFR
1040.10 and 1040.11
Class 1 Laser Product
