Installation
G&D FIBREVision ·
7
Installing the computer module (
FIBREVision-CPU
)
The computer, whose signals are transmitted to the remote console, is connected to
the computer module. A local console can optionally be connected to the computer
module.
Connecting the computer
DVI CPU:
Use the
DVI-D-M/M-2
cable to connect the digital video output of the com-
puter to this interface.
USB CPU:
Use the
USB-AM/BM-2
cable to connect the USB interface of the com-
puter to this interface.
Keyb. CPU:
Use the purple plug of a
Twin-PS/2
cable to connect the PS/2 keyboard
interface of the computer to this interface.
Mouse CPU:
Use the green plug of a
Twin-PS/2
cable to connect the PS/2 mouse
interface of the computer to this interface.
Additional interfaces of
FIBREVision-AR
and
-ARU
variants
:
Line Out:
Use the
Audio-M/M-2
cable to connect the Line-In interface of the com-
puter to this interface.
Line In:
Use the
Audio-M/M-2
cable to connect the Line-Out interface of the com-
puter to this interface.
RS232:
Use the
RS232-M/F-2
cable to connect the nine-pin serial interface of the
computer to this interface.
Figure 1: Interfaces to connect the computer to the computer module
NOTE:
You can use either the USB interface
USB CPU
or the PS/2 interfaces
Mouse CPU
and
Keyb. CPU
to transmit the mouse and keyboard signals of both con-
soles
.
