GST I-9105R, Инструкция по установке и эксплуатации

Страница: 20 / 26

I-9105R
Intelligent Reflective Beam Detector
Installation and Operation Manual
The Intelligent Solution
18
z
Enter I
2
C mode of the programmer, and the screen
shows “0”.
z
Input unlock password, press Clear, and open the lock.
z
Press Function and then figure “4”, the screen shows “
－
”.
z
Input the device type to be set, press Program to begin
programming. “P” will be shown when successful, otherwise
“E” will be shown.
z
Pressing Clear shows “0” on the screen, and you can go on
with further operations.
Note: The hand held programmer has lock password to
prevent non-special personnel from modifying some
important data. “456” is unlocking password; “789” is
locking password.
5. Other Functions
1
）
Automatic Compensation of Light
When dust exists in the working environment of the detector, the
emitting window, receiving window and reflector will be covered
with dust, which will affect normal operation. In order to solve the
problem, we designed the function of automatic compensation of
light. When there is dust on windows, the detector can judge the
amount of dust, and compensate the received signal through
internal program and circuit to ensure the detector can continue to
work normally. The detector gives fault signal when dust on the
lens and reflector surface reaches a certain level and light
compensation reaches the limit for the detector to work normally.
2
）
Self-diagnosis on Optical Signal
The detector has functions of checking emitting, receiving and
amplifying circuit. When there is fault with these three parts of
circuit during operation, the detector will generate fault
information.