GST I-9105R, Инструкция по установке и эксплуатации

Страница: 13 / 26

I-9105R
Intelligent Reflective Beam Detector
Installation and Operation Manual
The Intelligent Solution
The detector can be surface-mounted in two ways: with conduit
embedded surface-mounted.
(1)Embedding conduit
a. Remove the detector’s top cover.
b. Align the base of the detector over the back box and mark
the positions of mounting holes on the wall.
c. Drill two holes at the marked positions, and push two
∅
6
plastic expansion bolts in.
d. Thread the wires through the cable entry, ensuring the
length of wires inside convenient for connection.
e. Fix the detector base on the wall with two plastic
expansion bolts and flat washers.
Mounting method is shown in Fig. 9.
Back Box
Plastic Expansion Bolt
Fig. 9
（
2
）
Conduit surface mounting
a. Put the mounting bracket at position intended to
install the detector; mark the locations of the four
holes of mounting bracket on the wall.
11