GST I-9105R, Инструкция по установке и эксплуатации

Страница: 14 / 26

I-9105R
Intelligent Reflective Beam Detector
Installation and Operation Manual
The Intelligent Solution
b. Drill the holes on marked positions, and push
∅
6
plastic expansion bolts in.
c. Fix the mounting bracket on the wall with four
∅
6
plastic expansion bolts and flat washers.
d. Remove the detector’s top cover; thread the wires
through the cable entry, ensuring the length of wires
inside convenient for connection.
e. Fix the detector base onto the bracket with two M4
×
10 bolts and flat washers.
f. The mounting bracket should be earthed through the
mounting hole .
Mounting method is shown in Fig. 10.
B racket
P lastic E xpansion B olt
C onduit
)
Holes for fixing
the detector
Bracket
Earth label
Mounting hole
Fig. 10
3) Mounting the Reflector: The reflector is mounted opposite
the detector but in line with it. When the distance between the
detector and the reflector is more than 8m (less than or equal
to 40m), one reflector is enough. When the distance is more
than 40m (less or equal to 100m), four reflectors are needed.
Two
∅
6 plastic expansion bolts are needed to fix a single
reflector. Mounting size is shown in Fig.11a. If four reflectors
12