GSi TYMPSTAR PRO, Руководство пользователя

Страница: 48 / 134

Tympanometry Test Menu
Auto Sequence
The auto sequence button allows the user to perform a series of tests
automatically. The Auto Sequence menu option has a protocol name to indicate
the auto sequence protocol that will run if the button is pressed. The protocol is
changed from the Settings dialog.
Auto Start
The Auto Start check box determines if the test starts automatically upon
obtaining a seal. When the box is checked, the tympanogram data collection
begins as soon as a seal is obtained. When the box is not checked, the start
button on the device or probe shoulder box is used to start a test.
Probe
The Probe button controls the probe tone frequency used for recording the
tympanogram. The button indicates the current setting. When the button is
pressed, a sub menu is presented and the user may choose between 226 Hz, 678
Hz and 1000 Hz.
Immittance
The Immittance button selects the tympanometry component(s) that is displayed
on the graph. The button label indicates the current setting. When the button is
pressed a submenu is displayed where the user may choose between the
Admittance (Y) and the two components of Admittance, Susceptance (B) and
Conductance (G) and the combined graph showing both B and G (B/G). The
default setting for the immittance for data collection is set in the Config App but
may be changed on the analysis.
Baseline
The Baseline checkbox button is used to select if the tympanogram is baseline
adjusted. When the button is selected the starting pressure admittance value is
used as a baseline (0 mmho) and the data is plotted relative to that pressure. The
default setting for the baseline for data collection is set in the Config App but
may be changed on the analysis.
Sweep Rate
The Sweep Rate button is used to select the sweep rate (daPa/sec) for the
pressure change when collecting a tympanogram. The button label indicates the
current setting. When the button is selected a submenu of options is presented.
Mark Test
The Mark Test menu option is used to indicate the tympanometry tab that will be
used when the data is transferred to GSI Suite or printed directly from the device.
The marked tab is indicated by the check mark in the tab area. The last test is
automatically marked.