GSi TYMPSTAR PRO, Руководство пользователя

Страница: 42 / 134

Reflex Result
Each collected reflex is displayed under the parameter buttons. For each reflex
the level of the stimulus and stimulus ear are displayed if a reflex is obtained. A
‘NR’ (No Response) is displayed if no reflex was found at the tested level (dB
HL). A “DNT” (Did Not Test) is displayed if the test was not able to be
performed.
Screener Test Menu
Probe
The Probe button controls the probe tone frequency used for recording the
tympanogram. The button indicates the current setting. When the button is
pressed the options toggle between 226 Hz or 1000 Hz.
Auto Start
The Auto Start check box determines if the test starts automatically upon
obtaining a seal. When the box is checked, the tympanogram data collection
begins as soon as a seal is obtained. When the box is not checked, the start
button on the device or probe shoulder box is used to start a test.
Sweep Rate
The Sweep Rate button is used to select the sweep rate (daPa/sec) for the
pressure change when collecting a tympanogram. The button label indicates the
current setting. When the button is selected the options toggle between 600/200
or 200.
Mark Test
The Mark Test menu option is used to indicate the screening tab that will be used
when the data is transferred to GSI Suite or printed. The marked tab is indicated
by the check mark in the tab area. The last test is automatically marked.