Grundig Toronto 55 CLE 6545 AL, Инструкция пользователя

Страница: 83 / 95

ENGLISH 82­
SPECIAL­SETTINGS
­----------------------------------------------------------------------------------------
Searching­for­digital­television­
channels­from­a­satellite­manu-
ally
If a certain channel cannot be found with au-
tomatic search, you can search it manually by
manual search function. You must enter all pa-
rameters of the channel correctly. You can ob-
tain the current transponder information from
teletext page, satellite TV magazines or internet.
1
Open the menu with »
MENU
«.
2 Activate the menu item »Settings« with
» OK «.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
4 Select the line »Manual Channel Search«
with »
V
« or »
Λ
« and press » OK « to con-
firm.
5 Select the option »Satellite« with »
<
« or »
>
«
and press » OK « to confirm.
6
Select the required items with »
V
« or »
Λ
«.
– »Service Type«: Press »
<
« or »
>
« to select
whether you want to search for only televi-
sion channels (DTV), only radio channels
(Radio) or both (Radio+TV).
– »Scan Type«: Press »
<
« or »
>
« to select
whether you want to search for only free
digital television channels (Free), only
scrambled digital television channels
(Scrambled) or both (Free + Scrambled).
– »Transponder«: Enter channel frequency
with »1...0« as a 5-digit number.
– »Symbol Rate«: Enter channel symbol rate
with »1...0« as a 5-digit number.
– »Polarization«: Select the channel polar-
ization with »
<
« or »
>
« as »Horizontal« or
»Vertical«.
– »Network Search«: Select the network
search with »
<
«or »
>
« as »On« or »Off«.
7 Press »

« red button to start searching.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
Note:
7
The search can be aborted with » EXIT «.
8
Press »
EXIT
« to end the setting.
LNB­Settings
Notes:
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
7
Your TV supports SCR system (Single Chan-
nel Router). If you are using SCR satellite
system, follow the steps described in »LNB
Type« section.
1 Open the menu with » MENU «.
2
Activate the menu item »Settings« with
»
OK
«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press » OK « to confirm.
4 Select the line »Manual Channel Search«
with »
V
« or »
Λ
« and press » OK « to con-
firm.
5
Select the option »Satellite« with »
<
« or »
>
«
and press »
OK
« to confirm.
6 Activate the option »Antenna Settings« with
»

« (blue).
– The »Antenna Settings« menu is dis-
played.
7 Select the required items with »
V
«, »
Λ
«.
– »Satellite«: Press » OK « and use »
<
«, »
>
«,
»
V
« or »
Λ
« to pick the satellite you wish
to get the digital stations from and press
» OK « to confirm
– »Transponder«: »Press » OK «, and use
»
<
«, »
>
«, »
V
« or »
Λ
« to select a tran-
sponder and press » OK « to confirm. Use
»

« (red) to add a transponder, use »

«
(green) to delete it, or use »

« (blue)
to change transponder data
– »LNB Type«: Press »
OK
« and use »
<
«
or »
>
« to select the LNB type used in the
satellite system and press »

« (green) to
confirm. If you are using the SCR System,
please perform the »User Band«, »KB
Frequency« and »LNB Selection« settings.
»User Band«: Select the user band
number assigned to the user with »
<
«
or »
>
«.
»UB Frequency (MHz)«: Enter the
user band frequency assigned to the
user band with » 1...0 «.