Grundig Toronto 55 CLE 6545 AL, Инструкция пользователя

Страница: 37 / 95

ENGLISH 36­
8 Select the line »Select Access Point« with
»
V
« or »
Λ
« and press » OK « to confirm.
– Present WPS-supported wireless networks
are scanned to display in the »Select Ac-
cess Point« menu.
9 Select the network that you want to connect
with »
V
«, »
Λ
«, »
<
« or »
>
« and press » OK «
to confirm.
– 8-digit pin code is displayed in the wire-
less WPS menu.
Note:
7
Refer to the manual of your router to find out
how the PIN is entered via a PC.
10
Use a PC to enter the pin on the router (e.g.
AVM FRITZ!Box: menu item WLAN Set-
tings... WPS) and save.
Note:
7
The 8-digit PIN code must be entered in the
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
11 Press »

« (green) to confirm the registra-
tion.
– The message “Connection to Gateway:
Success” appears.
12 Press »

« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Successfull«, »Internet Connection: Suc-
cessfull« messages and MAC address will
be displayed.
13 Press » EXIT « to end the setting.
Connecting­automatically­by­enter-
ing­the­network­password
Use this method for establishing a connection
if your router does not support “WPS-PBC” or
WPS PIN entry.
1
Open the menu with »
MENU
«.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Network Configura-
tion« with »
>
« or »
<
« and press »
OK
« to
confirm.
– »Network configuration« menu is dis-
played.
Network Configuration Timer Applications TV Settings
Ch
a
nge Connection T
y
p
e
Wired
Network Configuration AUTO
Ad
v
an
ced
OK
Back Ex
it
Con
n
ect Test Con
n
ection Ch
ang
e Area
4 Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press » OK « to con-
firm.
5 Select the option »Wireless« with »
<
« or
»
>
« and press » OK « to confirm.
– WiFi warning screen will be displayed.
6­
Activate WiFi with »

« (green).
7 Select the line »Network Configuration«
with »
V
« or »
Λ
« and select the option
»AUTO« with »
<
« or »
>
«.
8­ Select the line »Select Access Point« with
»
V
« or »
Λ
« and press » OK « to confirm.
– »Select Access Point« menu is displayed
by scanning available wireless networks.
9
Select the network that you want to connect
with »
V
«, »
Λ
«, »
<
« or »
>
« and press »
OK
«
to confirm.
– Wireless connection password screen is
displayed.
Note:
7
For device to discover the wireless modem
on the network, the network name should
support ASCII characters.
NETWORK­SETUP
­-------------------------------------------------------------------------------------------