Grundig Toronto 55 CLE 6545 AL, Инструкция пользователя

Страница: 33 / 95

ENGLISH 32­
Wired­network­settings
There are two ways of making the wired network
settings.
A
Automatic connection,
All data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B
Manual connection,
all data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
Automatic­connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those val-
ues manually.
1 Open the menu with » MENU «.
2
Activate the menu item »Settings« with
»
OK
«.
3
Select the menu item »Network Configura-
tion« with »
>
« or »
<
« and press »
OK
« to
confirm.
– »Network configuration« menu is dis-
played.
Network Configuration
Timer Applications TV Settings
Back Ex it Con n ect Test Con n ection Ch ang e Area
Ch
a
nge Connection T
y
p
e
Wired
Network Configuration Auto
Ad
v
an
ced
OK
4
Select the line »Change Connection Type«
»
V
« or »
Λ
« and press »
OK
« to confirm.
5 Select the option »Wired« with »
<
« or »
>
«
and press » OK « to confirm.
NETWORK­SETUP
­-------------------------------------------------------------------------------------------
6 Select the line »Network Configuration«
with »
V
« or »
Λ
« and use »
<
« or »
>
« to
select »AUTO«.
7 With »

« (red) select »Connect« to establish
modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
8
Press »

« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
9
Press »
EXIT
« to end the settings.
Note:
7
If you do not have a dynamic network, fol-
low the instructions in manual connection
section.