Grundig Toronto 55 CLE 6545 AL, Инструкция пользователя

Страница: 18 / 95

17­
ENGLISH
SETTINGS
­------------------------------------------------------------------------------------------------------------------
Tuning­cable­digital­television­chan-
nels­(DVB-C)
26 Select the option »Cable« with »
<
« or »
>
«
and press » OK « to confirm.
27
Select the line »Scan Type« with »
V
« or
»
Λ
«.
Select the option »Quick« or »Full« with »
<
«
or »
>
«.
– »Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
– »Full« scan function scans the entire fre-
quency range selected. With this search
option, search can take a long time. This
search type is recommended. Some cable
providers do not support »Quick« scan.
Note:
7
You can speed up the search. To do this,
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet fo-
rums.
28­ Use »
V
« to select the push button »Next
Page« and confirm with » OK «.
Note:
7
Perform Channel Type selection. Press »
<
«
or »
>
« to select whether you want to search
for only digital channels (Digital), only Ana-
log channels (Analog) or both (Digital +
Analog) and press » OK « to select and mark
or unmark the »Digital« and »Analog« items.
29
Press »

« (red) to start searching.
– The »Automatic Channel Search« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
30 Select the »Channel Editor« with »

« (red).
Tuning­terrestrial­digital­television­
channels­(DVB-T)
31 Select the option »Air« with »
<
« or »
>
« and
press » OK « to confirm.
Important:
7
The antenna power supply (5V ) may only
be switched on if the antenna is an active
indoor antenna with a signal amplifier and
it is not already supplied with a voltage via
a mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
32 Select the line »Active Antenna Power« with
»
V
« or »
Λ
«.
Switch on the antenna power supply for the
antenna with »
<
« or »
>
« (»On«).
33 Select the line »Next Page« with »
V
« or
»
Λ
« and press » OK « to confirm.
Note:
7
Perform Channel Type selection. Press »
<
«
or »
>
« to select whether you want to search
for only digital channels (Digital), only Ana-
log channels (Analog) or both (Digital +
Analog) and press » OK « to select and mark
or unmark the »Digital« and »Analog« items.
34
Press »

« (red) to start searching.
– The »Automatic Channel Search« menu
appears, and the search for TV channels
begins.
– The scan is complete as soon as the
»Search is completed!« appears.
35
Select the »Channel Editor« with »

« (red).