Grunbeck softliQ:PA, Руководство по эксплуатации

Страница: 62 / 76

Dismantling and disposal
62 | 76
11 Dismantling and disposal
11.1 Dismantling
The work described herein represents an intervention into your drinking water system.
Have this work performed by specialist companies and specialist installers only.
CAUTION: The system is pressurised and connected to the electrical system
● Injuries due to water escaping under pressure.
● Risk of electric shock.
► Depressurise the product and disconnect it from mains prior to starting the
dismantling process.
1. Close the shut-off valve at the drinking water’s point of entry inside the house.
2. Open a water tap.
3. Wait for a few seconds.
» The pressure in the product and the pipe network is being relieved.
4. Close the water tap.
5. Disconnect the product from mains.
» The system is de-energised.
6. Separate the product from the connection hoses.
Keep a collecting vessel (e.g. a bucket) handy to catch escaping water.
7. Separate the connection hoses from the connection block.
8. Dismantle the connection block.
9. Close the gap in your drinking water pipes, e.g. by using an adjusting piece (order
no.: 128 001), for instance.
11.2 Disposal
Used electrical and electronic goods have to disposed of in an environmentally sound
manner with the respective, competent disposal facilities and specialist companies.
Do not dispose of the packaging, the products and/or accessories together with domestic
waste.
● Comply with the applicable national regulations for disposal.
● Make sure that the packaging, the product and the accessories are disposed of
properly.