Grunbeck GENO-softwatch Komfort, Руководство по эксплуатации

Страница: 29 / 47

Automatic water analysis system
GENO-softwatch Komfort
Order no. 145 172 955-inter Edited by: phar-mrie G:\BA-172955-INTER_145_GENO-SOFTWATCH KOMFORT
29
3.4 Alarm messages, limit value exceeded
Flashing red + flashing red
Analysis result (flashing red) + alarm signal (flashing red): The
display is flashing and in combination with the flashing red display
for the analysis result indicates that the set limit value has been
exceeded.

The relay REL 1 for "limit value exceeded" is active.
Flashing red + red
Analysis result (flashing red) + alarm signal (red): The display is
illuminated permanently and in combination with the flashing red
display for the analysis result indicates that the set limit value has
been exceeded.

The relay REL 1 limit value exceeded was automatically
cancelled by pressing a key or when the relay was triggered by
an impulse.
Red fl yellow fl red flashing
The yellow LED is flashing and thus signals that no analyses are
started automatically. The system is programmed to stop the
analysis if the limit value has been exceeded. At the same time, the
red "Analysis result" display lights up (refer to program switches S4
and S5).

The relay REL 1 for "limit value exceeded" is active.
Red + yellow flashing
The limit value has been exceeded - however, relay REL 1 has not
yet picked up (suppression of first value) takes place in 4 minutes.
Flashing blue + flashing red
Lack of indicator (blue flashing) + alarm signal (red flashing):
the display flashes and signals an indicator level that might no
longer be sufficient for unattended operation in the set analysis
interval for 72 hours.

The relay REL 2 fault is active (dropped out).

Note: Confirm the BOB alarm by pressing the Reset key.
Flashing blue + red
Lack of indicator (flashing blue) + alarm signal (red): The display is
flashing and in combination with the flashing blue display for lack of
indicator indicates a lack of indicator < 10 %.

The relay REL 2 faults has been reset picked up.

The BOB signal has already been acknowledged.
rot rot
rot gelb
blau rot
blau rot
red red
red yellow red
red yellow
blue red
blue red