Automatic water analysis system
GENO-softwatch Komfort
Order no. 145 172 955-inter Edited by: phar-mrie G:\BA-172955-INTER_145_GENO-SOFTWATCH KOMFORT
17
The analysis devices of the GENO-softwatch Komfort are specifically
designed for BOB operation (operation without supervision). Steam
boilers require a qualitative monitoring of the water quality, in
particular of the concentration of the water hardness in the boiler feed
water, as per the technical guidelines for steam boiler systems
TRD 604 ("Technical Regulations for Steam Boilers", published by
the TÜV).
The analysis devices of the GENO-softwatch Komfort register the
indicator consumption in order to make sure that during the times of
unsupervised operation, a sufficient amount of indicator is available
for reliable analysis operations.
Whether the indicator supply is sufficient for the next 72 hours of
operation is calculated subject to the set analysis interval.
If the next 72 hours of operation without constant supervision can no
longer reliably be guaranteed, the alarm "lack of indicator" will be
released at the relay output REL 2.
Warning!
The indicator supply can only be calculated correctly if -
after the replacement of a new 500 ml indicator bottle - the internal
counter is reset by means of the key combination for RESET.
+
new indicator bottle
Note:
The system does not recognize the content of the bottle.
By means of a RESET, an internal counter in the hose dosing pump is
reset and then starts counting backwards from 500 ml again.
The counter may only be reset to ZERO. If the key combination is
pressed during operation without prior replacement of a new, full
bottle, the indicator supply cannot be calculated correctly and the
alarm will not be emitted or be emitted at the wrong time. The same
also applies if the RESET was omitted.
