GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
9
5.
Use the accessories suitable for the specific application and
operating pressure and observe the relevant safety information.
6.
Regularly check that the safety devices, electrical lines, safety valve
and tubes are in perfect condition.
7.
In the case of any damage to electrical or pressurised components,
disconnect these from the mains or depressurise them and have
them checked/repaired by a specialist.
8.
Hold or secure free tube ends as these could cause injuries by
whipping around. When releasing the tube coupling, the coupling
piece is to be held securely in order to avoid injuries caused by the
tube whipping back quickly.
9.
Do not "play" with compressed air or aim it at others! Do not use
compressed air to clean clothes.
10.
Ear protection must be used when working with the flushing
compressor.
11.
Depressurise the pressure vessel via the drain valve prior to
transporting the flushing compressor.
12.
Do not make any changes to the safety valve and pressure vessel.
13.
The compressor aggregate features a motor circuit breaker which
automatically interrupts the current supply in the event of an
overload. In this case, pull the plug out of the mains and wait a few
minutes before resetting the motor circuit breaker and then put the
plug back in. If the motor circuit breaker should be triggered again,
disconnect the power supply and contact the Grünbeck technical
customer service/authorised service company.
Danger!
Disinfectants are hazardous substances. When using optional
disinfectants, the relevant safety information and safety data sheets are
to be observed and the prescribed protective equipment is to be used.
Note:
By concluding a maintenance contract, you ensure that all of the
required tasks are performed on time. You may perform the interim
inspections yourself.
