GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
44
Dead lines must be removed from the drinking water installation prior
to disinfection.
By way of principle, it is said that micro-organisms can only be
effectively killed or inactivated when the disinfectant can act directly
on the later. As such, sufficient concentrations of the disinfectant
must be able to access all areas of the drinking water installation.
Dosing of the disinfectant is done in a volume-controlled manner
upstream of the system section to be disinfected.
The GENO
®
-flushing compressor 1988 K is installed in the same way as
in the installation examples in fig. D-3, D-4, D-5. In addition, a system
divider is installed in the water inlet line to the flushing compressor, as
shown in fig. D-7, D-8, D-17 Please note the relevant instructions for
assembly of the dosing system.
1
Drinking water filter, e.g., BOXER
®
KD (on-site)
4
GENODOS
®
DM-SK dosing system
(accessory)
2
Connection pieces (accessories in case with connection
fittings ¾“-2“)
5
GENO
®
-DK 2, 1 system divider (accessory)
3
Dosing solutions (accessory)
Fig. D-17: GENO
®
-flushing compressor 1988 K with optional dosing system GENODOS
®
DM-SK