GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
35
2.3 Integration of several parallel-connected flushing compressors in piping in place of, for
example, an adjusting piece
For this connection type, the parts for the nominal widths 1½", 2", DN
65 and DN 80 are included in the connection fitting cases 1½" - DN 80.
With 1½", 2" and DN 65 for parallel connection of 2 flushing
compressors
With DN 80 for parallel connection of 2 or 3 flushing compressors
The installation length of these fittings is variable.
As of an installation length of approx. 300 mm, the connection pipes
can be fitted directly on the adapters as shown below.
If the connection bracket is also used, a connection can be made as of
an installation length of approx. 190 mm.
If with DN 80 only two flushing compressors are used, the two other
connections on the reducing flanges are sealed with caps.
Replace the on-site adjusting piece or device with an adapter and
integrate the flushing compressor with connection tubes.
Fig. D-6: Installation example of parallel integration of two flushing compressors
