GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
54
H
Maintenance and care
1 | Basic information
Some regular work is necessary in order to ensure the proper
functioning of the flushing compressor in the long term. All regulations
and guidelines which apply at the installation site must be strictly
adhered to.
The following work is to be performed:
Care work is required regardless of use.
Inspection at least every 2 months.
Maintenance at lease once per year.
An operation log must be kept to document care, inspection and
maintenance work (see the appendix for the operation log). In the
case of operational errors, the operation log helps to identify possible
error sources and verifies the proper monitoring of the flushing
compressor.
Notes:
A maintenance contract ensures that all the required
maintenance work will be performed in due time.
Notes:
Only use original consumables, accessories and spare parts (see
chapter C, consumables)!
Danger!
Before performing any care, maintenance or repair work on
the flushing compressor, this must be disconnected from the mains,
depressurised and effectively shut off and protected from other pressure
sources. Pull out the power plug and empty the drain valve.
Warning!
Risk of infection due to germ-infested water. In stagnant
water germs can multiply beyond safe limits. Ensure good hygiene when
working on and with the flushing compressor. Always drain off any
remaining water / disinfect parts which have come into contact with
water.
