Grizzly G0699 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 108

Grizzly G0699 Скачать руководство пользователя страница 69

Model G0699 (Mfd. Since 5/15)

-67-

SECTION 7: MAINTENANCE

For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.

Ongoing Check:
•

Loose mounting bolts.

•

Damaged saw blades.

•

Worn or damaged switches or wires.

•

Any other unsafe condition.

Weekly Maintenance:
•

Clean sliding table surface and grooves

•

Clean and lubricate sliding table ways
(

Page 69)

•

Clean cast iron saw table

•

Clean the rip fence assembly

Monthly Check:
•

V-belt tension, damage, or wear.

•

Clean/vacuum dust buildup from inside cabi-
net and off motor.

Every 6-12 Weeks:

•

Lubricate tilt and elevation trunnions
(

Page 68)

•

Lubricate tilt and elevation leadscrews
(

Page 69)

Schedule

Cleaning the Model G0699 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it. Treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning.

Cleaning

Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.

Keep tables rust-free with regular applications of
products like G96

®

Gun Treatment, SLIPIT

®

, or

Boeshield

®

T-9 (see

Section 5: Accessories on

Page 59 for more details).

Unpainted Cast Iron

To reduce risk of shock or

accidental startup, always

disconnect machine from

power before adjustments,

maintenance, or service.

«
...
67
68
69
70
71
...
»

Содержание G0699













































































































Отзывы:

Нет отзывов