Grizzly EXTREME G0513X2, Руководство пользователя

Страница: 39 / 100

G0513 Series Bandsaws (Mfd. Since 08/22)
-37-
3. Loosen the lateral rod cap screw and slide
the guide block to position the blade guides
approximately 0.016" behind the blade gul-
lets, as illustrated in
Figure 54.
Note: The 0.016" spacing is ideal, although
with larger blades it may not be possible.
In such cases, adjust the guide bearings as
far forward as possible to the blade gullets,
and still maintain the proper support bearing
spacing adjustment.
Blade
Gullet
Guide
Bearings
0.016"
Gap
Figure 54. Lateral adjustment of blade guides.
4. Tighten the lateral rod cap screw to secure
the setting.
5. Loosen both bearing rotation cap screws.
6. Rotate the knurled knob to position the bear-
ings approximately 0.004" away from the
blade.
7. Re-tighten the cap screws to lock the blade
guide bearings in position.
Models G0513X2 & G0513X2BF
Tools Needed Qty
Hex Wrench 5mm .............................................. 1
Feeler Gauges 0.004", 0.016" ...................1 Each
Note: The upper and lower guide bearings are
adjusted in the same manner.
To adjust the upper and lower blade guide
bearings:
1. DISCONNECT MACHINE FROM POWER!
2. Familiarize yourself with the blade guide con-
trols shown in Figure 53.
Figure 53. Blade guide controls.
Knurled
Knob
Blade Guide
Bearings
Bearing Rotation
Cap Screw
Lateral Rod
Cap Screw
Make sure that the blade teeth will not con-
tact the guide bearings when the blade is
against the rear support bearing during the
cut or the blade teeth will be damaged.