Grizzly EXTREME G0513X2, Руководство пользователя

Страница: 25 / 100

G0513 Series Bandsaws (Mfd. Since 08/22)
-23-
The table is heavy and requires two people
to lift it onto the trunnions. Remove the saw
blade to make table installation easier.
8. Models G0513 and G0513A40: Secure table
to trunnions, as shown in
Figure 23, with (4)
M8-1.25 x 16 hex bolts, 8mm lock washers,
and 8mm flat washers.
Models G0513X2 G0513X2BF: Secure table
to trunnions with (4) M8-1.25 x 25 hex bolts,
8mm lock washers, and 8mm flat washers.
9. Re-install saw blade.
Figure 23. Mounting the table.
Trunnions
x 4
10. Attach rear rail to table with (2) M6-1 x 16 cap
screws, as shown in Figure 24.
11. Attach front rail with (2) M6-1 x 20 hex bolts,
6mm lock washers, and 6mm flat washers, as
shown in
Figure 24.
12. Install (1) M8-1.25 hex nut on fence handle,
then thread handle into fence assembly, as
shown in
Figure 25. Tighten hex nut against
fence pivot block to secure handle.
Figure 25. Example of handle installed on fence
assembly.
Hex
Nut
Pivot Block
Figure 24. Rail installation.
Rear Rail
Front Rail
x 2
x 2
Models G0513, G0513A40 & G0513X2