GreenTec RM 232 Скачать руководство пользователя страница 34

Страница: 34 / 44

Rotary Mulcher RM 232

Inspection and maintenance

In order to ensure the machine a long working life, careful and attentive inspections are
needed.

The owner or operating manager must ensure that the tool is only used, maintained,
inspected and repaired by people who are familiar with it and instructed in the related
dangers (read and understand the entire chapter on "Safety").

If there is any doubt about the understanding, visit authorized specialist repair shops or
contact importer.

See

www.greentec.eu

Repair work that is not described in the instruction manual must only be done by
authorised specialist repair shops.

Disregarding one or more of the safety instructions may cause

•

Great personal danger as a result of mechanical and chemical

effects.

•

Danger for the environment as a result of hydraulic leakage!

•

Damages and malfunctions on machine, multi carrier or vehicle.

•

All compensation claims are ceased

To avoid accidents, the followings rules must always be followed

•

All work on the machine must only be done when it is brought to a

standstill, the carrier is turned off, the handbreak is pulled and the
key is removed from the ignition.

•

When doing maintenance work on a lifted tool and/or machine, it

must be secured using suitable support elements.

•

Only use suitable tools and safety work gloves, safety boots and

safety goggles.

•

Great caution should be exercised when working with the machine's

belt drive, as there is danger of jamming fingers and hands around
the driving belt, pulleys and guardings.

•

Dispose of oil and grease as required by law.

•

Immediately after the completion of work, all safety and protective

devices must be mounted and reactivated.

Содержание RM 232













































Результаты поиска

Содержание RM 232

Отзывы:

Похожие инструкции для RM 232

Бренды по названию

Популярные бренды

GreenTec RM 232, Руководство пользователя

Результаты поиска

Содержание RM 232

Отзывы:

Похожие инструкции для RM 232

Бренды по названию

Популярные бренды