GreenTec RM 232, Руководство пользователя

Страница: 14 / 44

14
Rotary Mulcher RM 232
Never do the following
Operate the machine before the manual has been read and understood - as well as
before becoming familiar with the operating handles.
Operate the machine when there are other close by or if there is risk of material
residue and rocks being slung out from behind or in front of the machine.
Allow an inexperienced person to operate the machine unattended.
Enter the work area of the machine / safety zone (risk of personal injury).
Try to locate a leak in the hydraulics with your hands, instead use a piece of cardboard
At any point allow children to play on or near the machine
Perform any kind of maintenance work or adjustments without first taking the pressure
off the tool, lowering your arms to the side, turning off the engine of the vehicle, pulling
the handbreak and removing the key.
Use the machine if any of the blades are missing
Use a machine with defective blades, bushings or bolts. The blade bolts are checked
and tightened minimum once a day. Any defective part of the rubber flap kit must be
replaced immediately.
Use or mount the tool on a tractor that does not comply with the manufacturer's
specifications.
Use the machine if the hydraulic system shows sign of damage.
Stop the engine when the hydraulic pressure is activated.
Use the machine if the rotor is caught in a cord or a wire. Stop immediately if this is the
case.
Try to use the machine for any purpose other than that for which it is intended.
Leave the cabin of the vehicle without removing the ignition key.
Transport the machine while the hydraulic pressure for the tool is activated.
Use a machine that has not been properly maintained or if any of its guardings are
missing or damaged.
Operate the vehicle or any of the operating handles from any other position than the
driver's seat.
Drive with the blades facing the cabin, as this causes a risk of stones or material
residue being hurled towards the cabin.