To order replacement parts for the Great Planes Pitts
Special ARF, use the order numbers in the
Replacement
Parts List
that follows. Replacement parts are available
only as listed. Not all parts are available separately (an
aileron cannot be purchased separately, but is only
available with the wing kit). Replacement parts are not
available from Product Support, but can be purchased from
hobby shops or mail order/Internet order firms. Hardware
items (screws, nuts, bolts) are also available from these
outlets. If you need assistance locating a dealer to purchase
parts, visit
www.greatplanes.com
and click on “Where to
Buy.” If this kit is missing parts, contact
Great Planes
Product Support
.
Replacement Parts List
Order Number . .Description . . . . . .How to purchase
GPMA2248 . . . . .COWL
Contact hobby
GPMA2249 . . . . .WHEEL PANTS
supplier
GPMA2250 . . . . .TOP WING SET
GPMA2251 . . . . .BOTTOM WING SET
GPMA2252 . . . . .FUSE KIT
GPMA2253 . . . . .TAIL KIT
GPMA2254 . . . . .CANOPY
GPMA2255 . . . . .LANDING GEAR
GPMZ0235 . . . . .INSTRUCTION MANUAL
Missing pieces . . . . .Contact Product
Support
Full-size plans . . . . . . .Not available
Before starting to assemble, use the
Kit Contents
list to
take an inventory of this kit to make sure it is complete.
Inspect the parts to make sure they are of acceptable
quality. If any parts are missing or are not of acceptable
quality, or if you need assistance with assembly, contact
Great Planes Product Support
. When reporting defective
or missing parts, use the part names exactly as they are
written in the Kit Contents list on the previous page.
Great Planes Product Support:
Phone: (217) 398-8970
Fax: (217) 398-7721
E-mail: [email protected]
You can also check our web site at for the latest Pitts
Special updates.
Ordering Replacement Parts
7
Parts not photographed (continued)
(34) #4 x 1/2" WOOD SCREWS (for attaching cabanes to
fuselage, brackets for struts and wires, aileron control
horns, tail gear to fuselage)
(4) 4-40 BLIND NUTS (for attaching wheel pants)
(7) 4-40 THREADED METAL CLEVISES (control surfaces)
(7) 4-40 HEX NUTS (control surface push rods)
(6) 2-56 x 1/2" PHILLIPS MACHINE SCREWS
(for attaching spats to landing gear)
(6) #8 x 5/8" PHILLIPS TRUSS HEAD SCREWS
(for attaching landing gear)
(2) 3-32 WHEEL COLLARS (for attaching tail gear linkage)
(2) WHEEL COLLAR SET SCREW
(for attaching tail gear linkage)
(1) NYLON TORQUE ROD HORN (tail gear linkage)
(1) 2-56 SOLDER METAL CLEVIS
(for attaching tail gear linkage)
(24) ALUMINUM CRIMP TUBES (for attaching flying wires)
(20) 2-56 THREADED BRASS ENDS (drilled for flying wires)
(4) 3/32 [2.4 mm] x 1" [25 mm] x 2" [51 mm] PLYWOOD PLATES
(for mounting wheel pants)
(4) 3/32 [2.4 mm] x 1" [25 mm] x 1" [25 mm] PLYWOOD PLATES
(for wheel pant bearing blocks)
(1) FLYING WIRE
(2) 90-DEGREE COMPOUND BEND BRACKETS
(4) 90-DEGREE BRACKETS
(8) 45-DEGREE BRACKETS
(4) 110-DEGREE COMPOUND BEND BRACKETS
(4) 70-DEGREE COMPOUND BEND BRACKETS
(8) 70-DEGREE BRACKETS
(6) COWL MOUNTING BLOCKS
(for attaching cowl to fuselage)
(2) 3/8" x 1" DOWEL (for bottom wing hold-down)
(10) 4-40 x 1/2" SOCKET HEAD CAP SCREWS
(for attaching top wing to cabanes and interplane struts)
(12) 4-40 x 3/4" SOCKET HEAD CAP SCREWS
(for attaching control horns to elevators and rudder)
(6) 2-56 STOP NUTS
(for attaching spats onto landing gear)
(1) TAIL WHEEL ASSEMBLY
