GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 06/2009
36
unlikely to adhere well. Before gluing parts to the fuselage it is essential to
roughen the surfaces with fine abrasive paper and de-grease them with acetone
or similar solvent, otherwise you will not obtain strong, durable joints. This applies
in particular to moulded GRP fuselages.
Additional items required
Glow motor and accessories
Motor
Order No.
Capacity
cc
Silencer
Order No.
Propeller
Order No.
OS MAX 160 FX
1923
26.23
1839.33
40 x 20 cm
1318.40.20
OS MAX FT-160
1412
2 x 13.26
1821.33
or
1894.33
38 x 20 cm
1318.38.20
G 26 petrol engine
1903
26
1556 and header 1556.2
with Teflon hose 1556.3
and spring clamp 1556.4
40 x 20 cm
1318.40.20
OS MAX FS 200
2728
32.4
-
45 x 20 cm
1318.45.20
Pneumatic retractable undercarriage
Order No.
186
Radio control system
For this model you require at least a six-channel RC system with nine servos.
The transmitter should also feature a servo reverse facility.
We particularly recommend our mx-16 to mc-24 computer systems. The model is
designed for standard-size servos.
We recommend the following receiver battery: GRAUPNER 4-2000 NIMH, Order No.
3415, which should be properly maintained before and after each flying session.
Please remember that the pack needs to be cycled (charged and discharged) several
times before it reaches full rated capacity.
For connecting the aileron and landing flap servos to the receiver you will need four
suppressor filters, Order No. 1040, or one folding ferrite ring, Order No. 98516.1 with
four extension leads, Order No. 3935.18.
The two aileron servo leads should be extended using extension leads, Order No.
3935.32; for the two landing flap servos you will need extension leads, Order No.
3935.11.
Foam padding for the receiver and receiver battery is included in the kit.
Standard-size servos can be used in this model.
