GRAUPNER mx-12 Hott, Руководство по программированию

Страница: 31 / 200

31 Description of transmitter - Telemetry data display
GENERAL MODUL
RECEIVER
GENERAL
ELECT. AIR
VARIO
GPS
0.0V
BAT1
BAT2
0.0V T2 0°C
T1 0°C
E FUEL F
CELL.V
1:0.00
2:0.00
3:0.00
4:0.00
5:0.00
6:0.00
0
0.0V
BAT1
BAT2
0.0V T2 0°C
T1 0°C
E FUEL F
ALT
0m
0m1
0m3
0.0A
POWER
0.0V
0
This display visualises the data from a General-Engine
module, Order No.
33610
, or a General-Air module,
Order No.
33611
, connected to the receiver. For more
information on these modules please see the Appendix,
or refer to the product on the Internet at www.graupner.
de.
Depending on the sensors connected to the modules,
the following data may be generated constantly on the
screen:
The actual voltage of up to two batteries (BAT1 and
BAT2); the measurement results from up to two tem-
perature sensors (T1 and T2); also a fluid level indicator
for the fueltank.
At the right-hand margin you will see an alternating
display either of the actual cell voltages of a battery
pack (up to six cells), or the current altitude relative to
the pilot’s location, climb / descent in m/1 s and m/3 s,
the actual current in Ampere and the actual voltage of
the battery connected to the sensor.
The meanings are as follows:
Value Explanation
BAT1 / BAT2 Battery 1 / Battery 2
FUEL Fuel level / Fueltank indicator
E / F Empty / full
T1 / T2 Temperature of sensor 1 / sensor 2
CELL V Cell voltage of cell 1 … max. 6
ALT Current altitude
0m1 m/1 sec climb / descent
0m3 m/3 sec climb / descent
0.0V Actual voltage of drive battery
0.0A Actual current in Ampere
Battery and consumption display
0.0V
0.0A
0mAh
0ml
This display visualises the actual voltage, the actual
current drain and the consumed capacity of any bat-
tery connected to the “Battery 1” socket of the General
Engine module (Order No.
33610
) or the General Air
module (Order No.
33611
), or the consumed fuel in ml.
SENSOR 1
0.0V
0°C
SENSOR 1
This display visualises the actual voltage and tempera-
ture measured by a temperature / voltage sensor, Order
No.
33612 or 33613 , connected to the “T(EMP)1” socket
of the General Engine module (Order No. 33610 ) or the
General Air module (Order No. 33611 ).
SENSOR 2
0.0V
0°C
SENSOR 2
This display visualises the actual voltage and tempera-
ture measured by a temperature / voltage sensor, Order
No.
33612 or 33613 , connected to the “T(EMP)2” socket
of the General Engine module (Order No. 33610 ) or the
General Air module (Order No. 33611 ).