GRAPHTEC CUTTING PRO FC3100-60, Руководство по обслуживанию

Страница: 16 / 175

FC3100-60 Service Manual
P/N53802-031T Rev. A
2 - 6
2.4 Running the Self Test
Your plotter is provided with a self test function that enables it to check its own functions. Because a
correctly drawn self test pattern signifies that all of the functions of the plotter (excluding the interface
settings) have been tested and found normal, this function is useful for determining whether the source of
a problem lies in the plotter itself or in the connection between the plotter and computer.
Warning : The pen starts moving as soon as the SELF TEST mode is selected by pressing the [ 2 ] key
(YES).
To avoid injury to yourself and damage to the plotter, keep your hands, face, and other
obstacles out of the vicinity of the cutting mat and paper.
Procedure
Replace the cutter pen at the pen carriage's pen holder with a platter pen and load paper in the plotter.
[ PAUSE ] : Press the [ PAUSE ] key to select PAUSE mode.
↓
[ NEXT ] : Press the [ NEXT ] key.
↓
[ NEXT ] : Press the [ NEXT ] key again.
↓
[ NEXT ] : Press the [ NEXT ] key again.
↓
[ 4 ] : Press the [ 4 ] key to select OPTION 2.
↓
[ 4 ] : Press the [ 4 ] key to select TEST.
↓
[ 3 ] : Press the [ 3 ] key to select SELF TEST.
↓
The prompt message below appears.
To select the SELF TEST mode, press the [ 2 ] key (YES) to initiate printing of the self test pattern.
To return to the OPTION 1/2 selection menu, press the [ 4 ] key.
↓
When you have finished printing the self test pattern, turn off the plotter to cancel SELF TEST mode.
Note : The self test pattern is repeatedly printed until the plotter is turned off. To discontinue printing,
even if a pattern is not completely printed, simply turn off the plotter.