manualshive.com logo in svg

GRAPHTEC CE7000-130AP, Руководство пользователя

Поделиться
Скачать
GRAPHTEC CE7000-130AP Скачать руководство пользователя страница 199

11-3

Priority of tool condition selection (CONDITION PRIORITY)

Select the priority of the setting created by different method when the tool condition is set.
All the tool condition that is received from the computer will be ignored, and only the setting and change of the 

tool condition from the control panel is accepted when MANUAL is selected. This setting set here is maintained 

even if the power is turned off.
On the other hand, it will set the most current tool condition either from the control panel or from the software 

when PROGRAM is selected. The values set from the control panel are maintained, and the values set from the 

software are erased when the power is turned off.

Operation

 1 

Press the [PAUSE/MENU] key in the default screen.

 MENU screen is displayed.

 2 

Press the [1] key (TOOL).

 TOOLS SETTING screen (1/4) is displayed.

 3 

Press the POSITION ( ) key.

 TOOLS SETTING screen (2/4) is displayed.

 4 

Press the [3] key (CONDITION PRIORITY).

 CONDITION PRIORITY screen is displayed.

 5 

Press the [1] key (MANUAL) or the [2] key (PROGRAM).

 6 

Confirm the setting and press the [ENTER] key (SET).

 Setting will be confirmed and it will return to TOOLS SETTING screen 

(2/4).

 7 

Press the [PAUSE/MENU] key.

 It will return to default screen.

Содержание CE7000-130AP





































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды