GRAPHTEC CE200-120, Руководство пользователя

Страница: 48 / 94

5 – 3
5.2 Moving the Pen Carriage in +100-mm Steps
This function lets you move the pen carriage from its current position in +100-mm steps along the X
and Y axes.
To Move the Pen Carriage
While the READY or PAUSE menu is being displayed, hold down the
ENTER
key while you press the
key. If you repeat this operation, the pen carriage is further moved in +100-mm steps each time.
To Return the Pen Carriage to its Initial Position
While the READY or PAUSE menu is being displayed, hold down the
ENTER
key while you press the
key.
5.3 Clearing Data from the Internal Memory
This function clears the cutting plotter’s internal memory of data that was sent from the computer. Use
this function when you wish to discontinue a cutting operation that is in progress.
Step
1
Press the
PAUSE
key to enter PAUSE status.
Step
2
If data is being sent to the cutting plotter from the
computer, stop the data transmission.
Step
3
Press the
NEXT PAGE
key until the menu below appears.
CLEAR BUFFER
FEED
Step
4
Press the
F1/ORIGIN
key (CLEAR BUFFER) to display the prompt below.
CLEAR CLEAR
CANCEL OK?
Step
5
Press the
F1/ORIGIN
key (CLEAR) to clear the buffer.
Press the
F2/TEST
key (CANCEL) to cancel the CLEAR BUFFER operation.
Step
6
Press the
PAUSE
key to return to READY status.