Graco ToughTek F680e, Инструкция по эксплуатации

Страница: 10 / 54

Component Identification
Hydraulic Hydraulic Hydraulic Solenoid Solenoid Solenoid Valve Valve Valve (J) (J) (J)
The hydraulic solenoid valve (J) is normally closed,
so when de-energized (pump control switch (AA)
in OFF position) it will block flow and the hydraulic
pump will stall. When energized (pump control switch
in the ON position, or REMOTE position with the
remote switch in the ON position) it allows flow and
the hydraulic pump to operate.
If the solenoid is not receiving a signal and remains
closed when the pump control switch is in the ON
position, it can be manually overridden. To override,
push the red button in, turn counterclockwise 180°
and release. The solenoid valve will then remain
open at all times.
Hydraulic Hydraulic Hydraulic Pressure Pressure Pressure Control Control Control (S) (S) (S)
Use to adjust hydraulic pressure available to the
hydraulic drive system. Turn the hydraulic pressure
control (S) clockwise to increase pressure and
counterclockwise to decrease pressure.
Install Install Install the the the Remote Remote Remote Switch Switch Switch (17H197) (17H197) (17H197)
NOTE: NOTE: NOTE: Use zip-tie (ZT) to install the remote switch
to the hose or pole spray applicator (follow the
illustrations below). The remote switch will fit on
hoses/applicators sized .75 in. up to 1.25 in.
10 3A3110K